Seco SBC ADLER User Manual page 46

4.3.7 Network Stack configuration submenu
Menu Item Options
Network Stack Enabled / Disabled
Ipv4 PXE Support Enabled / Disabled
Ipv4 HTTP Support Enabled / Disabled
Ipv6 PXE Support Enabled / Disabled
Ipv6 HTTP Support Enabled / Disabled
PXE boot wait time [0..5]
Media detect count [1..50]
4.3.8 CSM configuration submenu
Menu Item Options
CSM Support Enabled / Disabled
Upon Request
GateA20 Active
Always
Immediate
INT19 Trap Response
Postponed
UEFI and Legacy
Boot option filter Legacy only
UEFI only
Do not launch
Network UEFI
Legacy
Do not launch
Storage UEFI
Legacy
Do not launch
Video UEFI
Legacy
ADLER
ADLER User Manual - Rev. First Edition: 1.0 - Last Edition: 1.2 - Author: A.R./S.B. - Reviewed by M.B. Copyright © 2022 SECO S.p.A.
Description
Enables or disables UEFI Network Stack. When enabled, following menu items will appear
Enables or disables IPV4 PXE Boot Support. If disabled, IPV4 PXE boot option will not be created
Enables or disables IPV4 HTTP Boot Support. If disabled, IPV4 HTTP boot option will not be created
Enables or disables IPV6 PXE Boot Support. If disabled, Ipv6 PXE boot option will not be created
Enables or disables IPV6 HTTP Boot Support. If disabled, Ipv6 HTTP boot option will not be created
Wait time to press ESC key to abort the PXE boot
Number of times that the presence of media will be checked
Description
Enables or disables the Compatibility Support Module. When enabled, the following menu items will appear
Upon Request: GateA20 can be disabled using BIOS services,
Always: do not allow disabling GateA20; this option is useful when any RT code is executed above 1MB.
BIOS Reaction on INT19 trapping by Option ROM:
IMMEDIATE - execute the trap right away;
POSTPONED - execute the trap during legacy boot
This option controls Legacy / UEFI ROMs priority
Controls the execution of UEFI and Legacy PXE OpROM
Controls the execution of UEFI and Legacy Storage OpROM
Controls the execution of UEFI and Legacy Video OpROM
46