Capturing A Video - Safety Vision SV-1000 User Manual

Capturing a Video

The DVR Flashlight captures video with synchronous sound in the MPEG-4
(.mp4) format.
To record a video:
1.
Press and hold the Record Button for two seconds.
The Data Indicator will flash for a few seconds. The DVR Flashlight is then
in Record Mode.
2.
Point the DVR Flashlight in the direction of the object you want to
record.
3.
Press the Record Button.
The Recording Indicator flashes and the LCD Display shows the duration of
the video being recorded.
4.
To stop recording video, press the Record Button again.
The Data Indicator flashes momentarily.
5.
Repeat steps 2 - 4 to record additional separate videos.
6.
Once finished, press and hold the Record Button to exit out of Record
Mode.
The time appears on the LCD Display.
12