Ipc Setup - Safety Vision OBSERVER 4120 User Manual

32

IPC Setup

The IPC Setup tab allows you to configure a number of IPC
networks.
1.
Select Enable for the channel you would like to use.
2.
Tap the Search icon (magnifying glass) to search for
available IP cameras.
The IPC search screen appears.
3.
In the IPC search screen, select an available camera
and tap OK.
4.
Tap on the Setup icon for each network.
The Network Setup screen appears.
5.
Enter the following for each network:
• Channel
• Protocol type
• IP address
• Port
• User name
• Password
41H series cameras: leave the User name and Password fields
blank.
Gen 3 (60-32000X[Exterior] and 60-20000X [Interior]): enter Ad-
min in the User name field and 1234 in the Password field.
Tap the last three digits of the Local address to enter these
numbers manually.
OBSERVER 4120 USER GUIDE
After making any entries, tap Save at the bottom of the screen.