14.3 Replacing the SD Card
Maintenance
part
Tools
NOTE
SD Card
(1) Turn OFF the Manipulator.
Removal
(2) Remove the power plug.
(3) Remove the optional slot cover on the back face of the Manipulator.
(4) Push the SD card which is inserted near the option slot to eject.
SD Card
NOTE
Installation
(1) Insert the SD card and inset to the SD card slot near the optional slot.
(2) Mount the optional slot cover by screws.
T-B series Maintenance Manual Rev.1
T3-B T6-B Maintenance 14. Lithium Battery, SD Card, Boards, and Filter
Name
SD card
Cross-point screwdriver (No.2)
Remove the SD card after removing the fieldbus I/O module if fieldbus I/O module is
inserted to the option slot. Also, install fieldbus I/O module after installing the SD
card. Also, install fieldbus I/O module after installing the SD card.
For more details about fieldbus I/O module, refer to the following.
Reference: T-B series Manual T3-B T6-B Manipulator
17. Fieldbus I/O
Sems bolt: 2-M3×6
For tightening hexagon socket head cap bolts, refer to "2.4
Socket Head Cap Bolts".
Sems bolt: 2-M3×6
Quantity
1
2182748
1
Option
Slot Cover
(Illustration: T3-B 401S)
NOTE
Tightening Hexagon
121