Epson T-B Series Maintenance Manual page 73

(16) Remove the elliptic cam bearing from the
(17) T6-B : Unscrew the motor mounting screws.
NOTE

T-B series Maintenance Manual Rev.1
Joint #1 motor.
There is a brass bushing in one of the set
screw holes. Be sure not to lose the bushing.
T3-B: A: Brass bushing
B: Set screw
T6-B: A: Brass bushing
B: Set screw
Then, remove the Joint #1 flange and
O-ring.
4-M4×12+small washer
There is an O-ring between the Joint #1
flange and the motor.
Be sure not to lose the O-ring.
T3-B T6-B Maintenance 9. Joint #1
T3-B
M4
2-M4×6
M5
T6-B
2-M5×6
T6-B
Elliptic cam bearing
A: Brass bushing
B:Set screw
Joint #1
motor
Elliptic cam bearing
A: Brass bushing
B:Set screw
Joint #1
motor
Joint #1 flange
Small washer
4-M4×12
Joint #1
motor
61