Epson T-B Series Maintenance Manual page 138

T3-B T6-B Maintenance 15. LED Lamp Unit
15. LED Lamp Unit
■ Do not connect or disconnect the connectors while the power to the robot system
is turned ON. Connecting or disconnecting the motor connectors with the power
ON is extremely hazardous and may result in serious bodily injury as the
Manipulator may move abnormally, and also may result in electric shock and/or
malfunction of the robot system.
■ To shut off power to the robot system, disconnect the power plug from the power
source. Be sure to connect the AC power cable to a power receptacle. DO NOT
WARNING
connect it directly to a factory power source.
■ Before performing any replacement procedure, turn OFF the Controller and
related equipment, and then disconnect the power plug from the power source.
Performing any replacement procedure with the power ON is extremely hazardous
and may result in electric shock and/or malfunction of the robot system.
Maintenance
part
Tools
Material
126
Name
LED Lamp Unit
Cross-point screwdriver (No. 2)
Nippers
Wire tie
Quantity
1 2182673
1 For cross-recessed screw
1
1
T-B series Maintenance Manual Rev.1
NOTE