Insert Or Pull Out Of Power Cable - Epson T-B Series Maintenance Manual

T3-B T6-B Maintenance 8. Cable

8.2 Insert or Pull out of Power Cable

Tools
Power Cable (1) Turn OFF the Manipulator.
Removal
(2) Remove the power cable cover.
(3) Remove power cable clamp.
NOTE

Power Cable (1) Connect power cable connector and install power cable clamp.
Installation
(2) Mount the power cable cover.
54
Name
Cross-point screwdriver
(No. 2)
Power Cable
Reference: 7.3 Power Cable Cover
Remove power cable connector.
When removing the power cable connector, pull it out with pushing clips on both side
of the connector.
Reference: 7.3 Power Cable Cover
Quantity NOTE
For cross-recessed
1
screw
T-B series Maintenance Manual Rev.1