General Function Operation; Fault Code Display Operation - Delta Electronics AC Servo Drive ASDA-AB User Manual

Chapter 4 Display and Operation|ASDA-AB Series
4.4

General Function Operation

4.4.1 Fault Code Display Operation

After entering the parameter mode P4-00 to P4-04 (Fault Record), press SET key to display the
corresponding fault code history for the parameter or press UP arrow key to display the fault code of H1
to H5 in order. H1 indicates the most recent occurred fault code, H2 is the previous occurred fault code
before H1 and so on. Please refer to the Figure 4.3. The recently occurred error code is 10.
Figure 4.3
4-6
Revision January 2009