Agilent Technologies SD-1 User Manual page 46

4
Using the SD-1 Solvent Delivery Module
Operation
3 To open the SETUP menu, press the ~ key.
4 Press the DOWN ARROW key to access the setup functions.
5 Place the cursor on HEADS CHANGE and press the DOWN ARROW key to scroll
6 To confirm the pump head removal, press ENTER.
7 Remove the pump heads as a complete assembly as described in the
46
Figure 22 Special display
Figure 23 SETUP display
to YES.
The following message will be displayed:
Figure 24 Engage the heads change
The following message will be displayed:
Figure 25 Removing mounting parts
following procedure.
OR
Disconnect the tubing from the inlet and outlet check valves.
SD-1 Solvent Delivery - User Manual