1
Introduction
Control
Main Displays
The main displays are accessed by pressing the function buttons on the front
panel.
Use this display to set the flow rate and ramp time. Legal flow rates are from
zero to the maximum for the pump head installed (200 , 500 , 800 or
3200 mL/min). Ramp time (in minutes; decimal format) is the time for a linear
change from the current to the new flow rate. Legal ramp times are from 0.00
to 9999.99 min.
Pressing the PRESS key opens the Pressure display.
Figure 8
To reach the rest of this display, press the RIGHT ARROW key (indicated by the
small arrow in the lower right corner). To reach the first part of the display
again, press the LEFT ARROW key.
Figure 9
The main displays sets:
• MAX P: Maximum pressure
• ACTION: When maximum pressure is reached limit flow to maintain the
• MIN P: Minimum pressure;
18
Pressure display 1
Pressure display 2
maximum pressure, or press STOP to stop the pump
SD-1 Solvent Delivery - User Manual