Agilent Technologies SD-1 User Manual page 11

Figure 3
Table 1 Rear panel
Component Function
Fan Cooling fan draws cooling air into back of pump, blows warm air out of bottom of pump.
External contacts Contains three terminal blocks (TB):
panel • TB-1 Analog
• TB-2 Digital input
• TB-3 Relay output
Overtemperature Safety feature cuts power to the SD-1 in case of overheating. The reset switch pops out. Restore
reset switch power to the pump by pressing the reset switch back in place.
Fuse holder Holds two fuses.
Serial connector Miniature D-connector used only for remote pump control by compatible PC software.
Mini-DIN connector 8-pin miniature connector.
Power receptacle Accepts standard grounded AC power cord.
SD-1 Solvent Delivery - User Manual
Agilent SD-1 Isocratic Solvent Delivery Module – rear panel
1
Introduction
Physical Layout
11