Agilent Technologies SD-1 User Manual page 21

Figure 14
The piston seal log shows:
• SEAL LOG: Sequential number of last seal change. Previous log entries can be
• DATE: Date of last seal change.
• USE: Use units since last seal change. Use units are proportional to number
• LIMIT: Number of units before another seal change. Set by user, depending
• CHANGED: Scroll to YES when seal change is performed.
Figure 15
The check valve log shows:
• CV LOG: Sequential number of last check valve service. Previous log entries
• DATE: Date of last check valve service.
• USE: Use units since last check valve service. Use units are proportional to
• LIMIT: Number of units before another service. Set by user, depending on
• SERVICED?: Scroll to YES when check valve is serviced.
SD-1 Solvent Delivery - User Manual
Piston seal log display
scrolled by pressing the UP ARROW.
of strokes and pump pressure.
on anticipated amount of use.
Check valve log display
can be scrolled by pressing the UP ARROW.
number of strokes.
anticipated amount of use.
1
Introduction
Control
21