1
Introduction
Control
The SETUP menu sets:
• HEADS
• DEVICE#
• SET CLOCK
SERVICE LOG display
Figure 12
Figure 13
The SERVICE LOG menu opens three log displays:
• Piston seal log
• Check valves log
• Pump drive log
20
•
HEADS CHANGE: Start the software-driven procedure to change pump
heads.
•
HEADS ID: Display the size of pump head installed and pressure
maximum.
•
DEVICE# PUMP: Set the ID number for the pump. (When under the control
of instrument control software, each device in the HPLC system must
have a unique ID number.)
•
DEVICE# CIM: Set the ID number for the built-in control interface.
•
SET CLOCK MM/DD/YY: Set month/day/year with numeric keys.
•
SET CLOCK HH:MM:SS: Set hour/minute/second with numeric keys.
Special display
SERVICE LOG display
SD-1 Solvent Delivery - User Manual