Unit Automatic Washing; Daily Machine Cleaning - Sanremo F18 SB Instruction Booklet

Cleaning
- Remove the filter holder and clean the blind filter,
washing it with running water.
- Refit the filter holder in the unit and repeat the
washing stage without pouring detergent in the
blind filter; a rinsing stage is then performed.
At the end of the rinsing phase disassemble and
remove the filter holder, replace the blind filter with
the normal filter and dispense a coffee to eliminate
any unpleasant flavours.
It is possible to interrupt the manual unit washing
in progress by pressing any button of the unit
concerned.
16.2.b

UNIT AUTOMATIC WASHING

To activate the automatic washing of all the units,
see the specific function in PROGRAMMING in the
paragraph TECHNICAL USER MENU.
16.2.c

DAILY MACHINE CLEANING

WARNING: DO NOT use corrosive
or abrasive detergents, use only
detergents specifically for cleaning
coffee machines or cleaning dishes.
DO NOT clean the machine using
water jets.
For cleaning, proceed as follows:
- remove the filter holders and empty them;
- remove the filters from their holders and immerse
both in a basin containing a specific detergent,
leaving them to soak for as long as the machine is
not used;
- remove the grille and wash it with running water
and specific detergents;
- after washing it, dry it completely with a soft cloth
and reassemble it.
57
F18 SB