Sanremo F18 SB Instruction Booklet page 48

F18 SB
Pressing button (E) shows the number of wash cycles
carried out by the machine since the last reset.
Washings are counted regardless of their type,
provided they have actually been carried out.
Press (D) to access the "washing cycle log" detail.
In this way it will be possible to consult the log of the
last 20 wash cycles carried out with a description of
the date and time.
01 KOMPLET WASCH
XX.XX.XX YY.YY
Where XX.XX.XX indicates day.month.year
and YY:YY indicate hour:minutes
To access the next wash history display, press (D) or
(C) to view the previous one.
Once the 10 logs have been recorded, the wash
cycle counter will automatically overwrite each time
a new wash cycle is performed.
At the end of the review, pressing button (E) allows
exit from this phase.
UNIT AUTOMATIC WASHING
After the settings for the global counters, press
button (D) again to switch to the automatic cleaning
function for all units. To enter the item, press the
button (E). The following screen will be displayed:
complete wash.
If you want to modify the parameter (display YES
or NO) you must act on buttons (A) (<) or (B) (>),
confirm with (E). Once "YES" has been confirmed,
the following screen will be displayed:
yes-no
If you decide to continue washing, remove the filter
holder and empty it, remove the filter and insert
the blind filter, pour specific detergent for coffee
machines into the blind filter; for the quantity, follow
the instructions on the detergent package. Pressing
(E) will start the automatic unit washing process and
the display will show "WASH. COMPLETE" with the
process countdown underneath. The LEDs (E) and (A)
of the units start to flash to confirm that the washing
phase has been carried out (the unit displays show
the "CL" message during the entire process). When
the washing phase is complete, the following screen
will be displayed:
Remove the filter holder and clean the blind filter,
washing it with running water. Reinstall the filter
holder in the unit. Pressing (E) will start the rinsing
process and the display will show "RINSE" with
arrows moving from left to right. At the end of the
rinsing phase, the display will show "EXIT MENU".
Disassemble and remove the filter holder, replace
the blind filter with the normal filter and dispense a
coffee to eliminate any unpleasant flavours.
If washing is not completed due to external causes
(power blackout), the next time the machine is
switched on, the rinsing phase is forced.
It is possible to directly access the complete unit
washing function without accessing the user menu
48
Programming
ADD DETERGENT
PRESS K5-GR1
RINSING
PRESS K5-GR1