Sanremo F18 SB Instruction Booklet page 34

F18 SB
Button panel for hot water dispensing
4. Hot water button (2 programmable doses)
Autosteamer button panel (optional)
1. Milk frothing button
2. Drink heating button
3. Button for washing the Autosteamer tap
4. Hot water dispensing button (2 programmable
doses)
The Autosteamer function allows you, by means
of a special steam wand equipped with a drink
temperature probe, to automatically heat and froth
milk to the set temperature (button 1) through the
combined use of air and steam. In addition with the
heating button (button 2) it is possible to heat any
drink to the set temperature using steam only.
Button for espresso coffee dispensing (A)
Place a cup under the single filter holder, then press
the button to start dispensing coffee.
The selected button remains on for the entire
dispensing, while all other LEDs turn off.
The seconds counter in the centre of the button panel
starts at value 00 and increments during extraction.
At the end of the extraction, the extraction time
remains visible until the next cycle.
Button for double espresso coffee dispensing
(B)
Place two cups under the double filter holder, then
press the button to start dispensing two coffees.
The selected button remains on for the entire
dispensing, while all other LEDs turn off.
The seconds counter in the centre of the button panel
4
1
2
3
4
starts at value 00 and increments during extraction.
At the end of the extraction, the extraction time
remains visible until the next cycle.
Button for weak black coffee dispensing (C)
Place a cup under the single filter holder, then press
the button to start dispensing weak black coffee.
The selected button remains on for the entire
dispensing, while all other LEDs turn off.
The seconds counter in the centre of the button panel
starts at value 00 and increments during extraction.
At the end of the extraction, the extraction time
remains visible until the next cycle.
Button for double weak black coffee
dispensing (D)
Place two cups under the double filter holder, then
press the button to start dispensing two coffees.
The selected button remains on for the entire
dispensing, while all other LEDs turn off.
The seconds counter in the centre of the button panel
starts at value 00 and increments during extraction.
At the end of the extraction, the extraction time
remains visible until the next cycle.
Button for continuous dispensing
(E) (ENTER)
Position a cup of suitable capacity for the desired
coffee quantity under the filter holder.
Press button (E) twice to start dispensing coffee
(twice if Purge is enabled) and press it again to
deactivate it. After 120 seconds, dispensing stops
automatically.
Purge
If enabled in the user menu, remove the filter holder
from the unit and press the button (E) once.
Button will become steady on and a small preset
quantity of water will be delivered for two seconds
in order to clean the unit head.
34
Using the machine