Emergency And Parking Brake - New Holland TX62 Operator's Manual

Hide thumbs Also See for TX62:
Table of Contents

Advertisement

WARNING:
To prevent runaway of the combine (i.e.
when the ground speed increases during
downhill driving and it is impossible to
reduce speed with the ground speed con-
trol lever), it is necessary to shift into a
lower gear appropriate to the steepness
of the hill.
This information is also given on a decal
situated on plate A under the arm rest
cover. See Figure 38.
CAUTION:
Never drive on public roads with any of
the mechanisms engaged.
The combine model TX67 is equipped with a remote
emergency and parking brake, and with a remote
gearshift system.

EMERGENCY AND PARKING BRAKE

The parking brake is operated by pressing button 23a
[symbol P] (Fig. 41). A control light and an audible
signal indicate the parking brake activation. The hy-
drostatic system will be disabled.
The emergency brake button has two positions:
S The first position brings the hydrostatic system
into neutral.
S The second position (i.e. button fully pressed) op-
erates the friction brake.
39
1
40
41
SECTION 2
50672
All models, except TX67
TX67
42765
2-31

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tx63Tx64 plusTx65 plusTx66Tx67Tx68 ... Show all

Table of Contents