Header Width: Xxx Cm - New Holland TX62 Operator's Manual

Select the number by pressing
, and then validate by pressing
.
NOTE:
Manual operation of the reel speed va-
riator swith increases (↑) or decreases
(↓) the reel speed versus the ground
speed but the relationship remains the
same (z), even if the battery key was
turned off.
b) Figure 134 - Appearing:

''HEADER WIDTH: XXX cm''

NOTE:
In case Imperial values were chosen
''HEADER WIDTH: XXft XXinch'' will ap-
pear.
In case a grain header is attached:
S
Select the correct header width by pres-
sing (*) or
to validate.
This will give a correct hectare count.
17 ft = 518 cm
20 ft = 610 cm
24 ft = 731 cm
A figure up to 1999 cm can be filled in.
(*): If the key is held for more than 2 sec-
onds, the speed of change increases!
or
(*), and
134
SECTION 4
48153
4-89