Table of Contents
Advertisement
To memorize current area counter values, the area
counter mode should be selected, with the ground
speed at ZERO.
Press
to open the area counter mode
Press
to open the memory screen and
to memorize.
All current area counter values (area, drum hours,
area capacity, date and time) will then be stored in
memory 1.
All other memorized results will then shift one memory
towards memory 9.
When all memories are occupied, the message
''Memories Full'', alternated with the message ''Clear
Memory'' , appears on the bottom text line and an
audible signal is generated. In this situation a new
area counter result cannot be memorized.
To clear memories, refer to subheadings 5.2 and 5.3.
REMARK:
Area and drum hours values of ZERO cannot
be memorized.
Memory screen bottom line Q
Total area and drum hours values.
These values are instrument life time totals and can-
not be cleared.
Leave the memory mode by pressing
The display automatically returns to the area counter
mode.
99
.
WORK 88.88 ha 8888 h
1
18 / NOV / 97
09.52
3.98 ha
1:01 h
3.87 ha/h
TOTAL 88.88 ha 8888 h
SECTION 4
52676
.
4-61
Advertisement
Table of Contents
