New Holland TX62 Operator's Manual page 267

ADJUSTMENTS AND MAINTENANCE
77
Rear-wheel position -- Figure 78
When operating on tracks, the complete steering
wheel and hydrostatic motor can be repositioned
on the steering axle in order to lift the machine
rear end to a level combine position.
Figure 78 shows the standard clearance position
U and the high clearance position V, when tracks
are used.
CAUTION:
Wheel drive assemblies are extremely
heavy. Use a lifting device of adequate
capacity. Reposition one side at a time.
The bolts W should be tightened to 440 Nm.
5-40
78
51594
51595