Table of Contents
Advertisement
FIELD OPERATION
The display will show -- Figure 116
''BE SURE ENGINE SPEED IS MAXI-
MUM AND PRESS ENTER''
Run the engine at maximum speed with-
out any mechanism being engaged and
press
The theoretical engine speed given be-
fore is now matched to the realistic one.
The lights on the rpm monitor will blink for
5 seconds.
The real engine high idle speed is now in-
troduced as reference rpm.
When selecting ''CAL ENGINE RPM:
S
NO'', the calibration procedure will auto-
matically continue with step j.
j)
Figure 117 -- Appearing:
''CLEANING SHOE
SL: YES
FS: NO''
In case the machine is equipped with a
S
fixed cleaning shoe, select:
''CLEANING SHOE
by pressing
to validate.
In case the machine is equipped with a
S
self-levelling cleaning shoe, select:
''CLEANING SHOE
by pressing
to validate.
On units equipped with a flex header con-
trol printed circuit, continue with step l.
4-80
to confirm this speed.
SL: NO
FS: YES''
or
, and
SL:YES
FS: NO''
or
116
117
, and
48155
48191
Advertisement
Table of Contents
