Table of Contents
Advertisement
CONCERN
No unloading tube move-
ment control H.
No header height control.
(*) NOTE:
It is always possible to control the hydraulic valves manually by pushing the electrical spool (rubber cap) of the valve con-
cerned.
POSSIBLE CAUSE
No current to spool.
No hydraulic control.
No current to spool.
No hydraulic control.
CORRECTION
Check
fuse
and replace, if
needed.
Use both plugs of reel horizontal
control valve (J) and control with
pedal switches in cab. (*)
Check oil level and top up, if
needed.
Check and tighten pump drive
belt.
Contact your local dealer.
Check
fuse
and replace, if
needed.
Contact your local dealer.
Check oil level and top up, if
needed.
Check and tighten pump drive
belt.
Contact your local dealer.
SECTION 6
PAGE
5-57
Fig. 1
3-19
5-19
--
5-57
5-58
3-19
5-19
--
6-13
Advertisement
Table of Contents
