Download Print this page
New Holland AutoCommand T7.175 Operator's Manual

New Holland AutoCommand T7.175 Operator's Manual

Hide thumbs Also See for AutoCommand T7.175:

Advertisement

Quick Links

ORIGINAL INSTRUCTIONS
OPERATOR'S MANUAL
T7.175 AutoCommand
T7.190 AutoCommand
T7.210 AutoCommand
T7.225 AutoCommand
Tractor - Tier 4B(final)
PIN HACT7****JE101001 and above
Part number 51544522
2
nd
edition English
December 2018
Replaces part number 47979236

Advertisement

loading
Need help?

Need help?

Do you have a question about the AutoCommand T7.175 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for New Holland AutoCommand T7.175

  • Page 1 ORIGINAL INSTRUCTIONS OPERATOR’S MANUAL T7.175 AutoCommand ™ T7.190 AutoCommand ™ T7.210 AutoCommand ™ T7.225 AutoCommand ™ Tractor - Tier 4B(final) PIN HACT7****JE101001 and above Part number 51544522 edition English December 2018 Replaces part number 47979236...
  • Page 2 Contents 1 GENERAL INFORMATION Metric and imperial units abbreviations........... . . 1-1 To the owner .
  • Page 3 Seat belt ................3-28 INSTRUCTOR'S SEAT Instructional seat .
  • Page 4 Gauges ................3-66 Indicator and warning lights .
  • Page 5 RECOVERY TRANSPORT Freeing a stuck tractor..............5-3 Towing the tractor.
  • Page 6 Power Take-Off (PTO) mode ............6-87 Pneumatic Trailer Brake Stabilization System .
  • Page 7 Lift rod adjustment ..............6-179 Top link adjustment .
  • Page 8 7 MAINTENANCE GENERAL INFORMATION Introduction ................7-1 Fuel requirement - Diesel fuel .
  • Page 9 Check the transmission oil level, the rear axle oil level and the hydraulic oil level ..7-40 Check the 4WD front axle differential oil level and the hubs oil level....7-41 Check the front PTO gearbox oil level.
  • Page 10 Hydraulic system hoses ............. . . 7-76 Check the brake pedal latching/unlatching .
  • Page 11 Three-point hitch front ..............9-16 Front remote control valve couplers .
  • Page 12: General Information

    1 - GENERAL INFORMATION 1 - GENERAL INFORMATION###_1_### Metric and imperial units abbreviations Typical applications Metric unit Imperial unit Name Symbol Name Symbol Area (Land area) acre hectare square meter m² square foot ft² square inch in² square millimeter mm² square inch in²...
  • Page 13 1 - GENERAL INFORMATION Typical applications Metric unit Imperial unit Name Symbol Name Symbol Temperature (other than thermodynamic) degrees Fahrenheit degrees Celsius °C °F Time hour hour minute minute second second Torque (includes bending moment, moment of force, and moment of a couple) newton meter pound foot lb ft...
  • Page 14 1 - GENERAL INFORMATION To the owner General information The Table of Contents page(s) are provided to have an overview of main manual’s topics. A detailed alphabetic This manual has been prepared according to ISO index is available at the end of this manual for locating 3600:1996 to assist you in the correct procedure for run- specific items.
  • Page 15 Thank you so much for reading. Please click the “Buy Now!” button below to download the complete manual. After you pay. You can download the most perfect and complete manual in the world immediately. Our support email: ebooklibonline@outlook.com...

This manual is also suitable for:

Autocommand t7.190Autocommand t7.225Autocommand t7.210