Tracks Lubrication; Lubricant Specification - New Holland TX62 Operator's Manual

Hide thumbs Also See for TX62:
Table of Contents

Advertisement

DRUM SPEED REDUCER [if installed] -- Figure 74
Oil level
Check the oil level daily through sight glass D.
If necessary, add oil through the filler plug E. Plug F is
the breather.
Oil change
S After the first 50 operating hours
S Thereafter, every 200 hours of operation.
Drain the oil through drain plug G and fill the gearbox
with 1 litre of oil.
Gearbox capacity
Approximately 0.15 kg of grease and 0.8 litre of oil.

Lubricant specification

Use AMBRA GR9 (ref. NH710A) or AMBRA GR75MD
(ref. NH720A) multipurpose grease, or a grease
meeting the NLGI 2 specification.
Use AMBRA HYPOIDE 90 gear oil (ref. NH520A) or
an oil meeting the following specification:
S API GL5 or MIL-L 2105D
S Viscosity grade: SAE 80W90
TRACKS [if installed] -- Figure 75
Oil level
With the combine standing on a level surface, the oil
should reach level plug H.
Oil change
S Every 200 operating hours, or
S Annually (after the season), whichever comes
first.
74
75
SECTION 3
21180
50101
3-23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tx63Tx64 plusTx65 plusTx66Tx67Tx68 ... Show all

Table of Contents