Basic hardware procedures
4.10
Switching on the server
CAUTION
▶
Before switching on the server, make sure the side cover is closed.
In order to comply with applicable EMC regulations (regulations on
electromagnetic compatibility) and satisfy cooling requirements, the
server must not run while the side cover is removed.
▶
For more information, see
▶ Press the On/Off button to start up the server.
▶ Ensure that the power-on indicator is lit green.
4.11
Handling the 2.5-inch HDD cage
4.11.1
Removing the 2.5-inch HDD cage
Figure 16: Removing the HDD cage (A)
▶ Remove the four screws (see circles).
▶ Remove the cover from the HDD cage.
60
"Important information" on page
Upgrade and Maintenance Manual
29.
TX1320 M5