Fujitsu PRIMERGY TX1320 M5 Upgrade And Maintenance Manual page 97

– Converting the server
– from rack model to floorstand model
– from floorstand model to rack model
Update your system information using the Chassis ID Prom tool. The tool and
more information are available to maintenance personnel from the Fujitsu web
pages:
https://partners.ts.fujitsu.com/com/service/ps/Servers/PRIMERGY/
▶ Select your PRIMERGY system from the main area of the page.
▶ From the categories selection, choose Software & Tools Documentation.
▶ In the Tools area click Tools: Chassis-IDProm Tool to download the file
(tool-chassis-Idprom-Tool.zip).
For Japan:
Follow the instructions provided separately.
Note on dust cover option
If the dust cover kit is installed, set the information within the Chassis ID Prom
tool accordingly.
Note on Advanced Thermal Design (ATD)
If the Advanced Thermal Design (ATD) option is available and has been
enabled for your server, please set information within the Chassis ID
Prom Tool accordingly.
The ATD option can only be ordered from the manufacturer as a factory
preset. To find out if your server is ATD-enabled, check for the ATD logo
on the identification rating plate.
For ATD logo and more information on Advanced Thermal Design
(ATD), see the operating manual of your server.
CAUTION
You can only set the ATD flag. Resetting the ATD flag using the Chassis
ID Prom Tool is not possible!
TX1320 M5 Upgrade and Maintenance Manual
Basic software procedures
97