Fujitsu PRIMERGY TX1320 M5 Upgrade And Maintenance Manual page 277

Tools:
Phillips PH2 / (+) No. 2 screw driver
Preliminary steps
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
Disconnecting the front USB connector
Figure 176: Disconnecting the front USB connector
▶ Disconnect the front USB connector cable from the connector "TYPE A
FRONT" on the system board (1).
▶ Disconnect the front USB connector cable from the connector "TYPE C
FRONT" on the system board (2).
Removing the front USB connector from FBU tray
▶ Remove the FBU tray, see
TX1320 M5
45.
Figure 120.
Upgrade and Maintenance Manual
Front USB connector
46.
48.
277