Fujitsu PRIMERGY TX1320 M5 Upgrade And Maintenance Manual page 121

Removing a hot-plug PSU
▶ Remove the power cord from the dedicated PSU, see
power cord" on page
Figure 45: Removing the PSU
▶ Push the handle of the PSU halfway upward in the direction of the arrow (1).
▶ Press in on the green locking latch (2).
▶ While keeping the green locking latch pressed, pull the PSU out of its bay
(3).
CAUTION
Excessive temperatures could damage system components.
▶
Never leave the bay for the hot-plug PSU empty for more than two
minutes during operation.
TX1320 M5
46.
Upgrade and Maintenance Manual
Power supply unit (PSU)
"Disconnecting the
121