Basic Information; Slots And Features; General Memory Population Rules - Fujitsu PRIMERGY TX1320 M5 Upgrade And Maintenance Manual

Main memory
10.2

Basic information

10.2.1

Slots and features

SERIAL
Display
PWR2
Port
VGA
PWR 1
Management
Figure 129: Memory slots overview
– Dual DDR4 memory architecture
– Four memory DIMM sockets
– Up to four DDR4 UDIMMs with up to 128 GB
The notation of the CPU, memory channels and DIMM sockets correspond to
the silk print on the system board.
For system relevant information, see the hardware configurator of your
server available online at the following address:
https://www.fujitsu.com/emeia/products/computing/servers
For Japan:
https://www.fujitsu.com/jp/products/computing/servers/primergy/
10.2.2

General memory population rules

– Populate memory slot 1 / channel A (DIMM 1A) first.
– Within all channels memory slot 1 must be populated prior to slot 2.
– For maximum performance, populate both channels with the same amount
of memory (symmetric dual channel configuration).
222
USB7
ROC
DIMM1B
DIMM2B
DIMM1A
DIMM2A
Upgrade and Maintenance Manual
P30
Battery
INTRUSION
ROC
PC98
Micro
SD
JP3
FAN2
SYS
TYPE A
FRONT
FRONT
PANEL
TYPE C
PWR4
FRONT
SMB
SYS
JP2 JP1
USB8
TX1320 M5