Fujitsu PRIMERGY TX1320 M5 Upgrade And Maintenance Manual page 244

Processor (CPU)
Preliminary steps
▶
"Locating the defective server" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
Removing the defective heat sink
▶ Remove the heat sink, see
or "Removing the performance heat sink" on page
▶ Remove the residual thermal paste from the CPU surface.
▶ Clean the CPU surface using a lint-free cloth.
Installing the new heat sink
▶ Remove the protective cover on the underside of the new heat sink.
CAUTION
▶
Do not touch the thermal paste on the underside of the heat sink.
▶ Install the heat sink, see
"Installing the performance heat sink" on page
Concluding steps
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶
"Performing a fan test" on page
244
45.
"Removing the standard heat sink" on page 231
"Installing the standard heat sink" on page 239
54.
57.
60.
100.
Upgrade and Maintenance Manual
43.
46.
48.
232.
242.
or
TX1320 M5