Fujitsu PRIMERGY TX1320 M5 Upgrade And Maintenance Manual page 242

Processor (CPU)
Installing the performance heat sink
Figure 148: Installing the performance heat sink
▶ Carefully place the heat sink on the four threaded holes as shown.
CAUTION
▶
Ensure that the screws on the heat sink are properly seated on the
threaded holes.
▶
Ensure that the heat sink cooling fins match the direction of the
airflow!
▶ Fasten the four captive screws on the heat sink in a crossover pattern
(screw torque: 0.6 Nm, not applicable for Japan) (1-4).
▶ Connect the CPU fan cable to the connector "FAN CPU" on the system
board, see Figure
Concluding steps
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
242
147.
54.
Upgrade and Maintenance Manual
57.
TX1320 M5