Hitching And Unhitching From Tractor - PRONAR T900 Operator's Manual

SECTION 2
• Any modification to the trailer frees the manufacturer from any responsibility for
damage or detriment to health, which may arise as a result.

2.1.2 HITCHING AND UNHITCHING FROM TRACTOR

• Do NOT hitch the trailer to tractor if the tractor does not fulfil the requirements
specified by the Manufacturer (minimum tractor power demand, wrong hitch, etc.)
– compare table (1.2) Requirements for agricultural tractor. Before hitching trailer
make certain that oil in external hydraulic system of tractor may be mixed with the
hydraulic oil of the trailer.
• Prior to hitching the trailer, check the technical condition of the trailer's and
tractor's hitch system and connection elements of the hydraulic, electrical and
pneumatic systems.
• The trailer and tractor must not be coupled if the hydraulic oil in the two machines
is of different types.
• Hitch the trailer to tractor according to the corresponding description - see
section (4.3). Pay special attention to the protections.
• While placing the support in transport position or rest position, do not place hands
between moving elements of the support. Make sure that the support is properly
locked with a pin.
• When the trailer hitching is completed, raise the support to transport position.
• Carefully read the tractor Operator's Manual.
• When hitching the trailer to tractor, use only the tractor's hitch which meets the
requirements of ISO 26402 standard. After completed hitching of the machines
check that the hitch is properly secured. Carefully read the tractor Operator's
Manual. If the tractor is equipped with an automatic hitch, make certain that the
coupling operation is completed.
• Be especially careful when hitching the machine.
• When hitching, there must be nobody between the trailer and the tractor.
• Hitching and unhitching the trailer may only take place when the machine is
immobilised with the parking brake.
2.3
Pronar T900