PANNORAMIC® SCAN RX 1.1
5.5 Progress features
The progress is visible both in Microscope and Planner modes whenever there is a running
hardware operation or scanning procedure. Progress content can be therefore different
depending on the type of the running procedure.
The following information is included in the progress log list during scanning:
•
Filter
•
Elapsed time
•
Location
•
Slide name
•
Free space
•
FOV number
NOVEMBER 18, 2021
FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC PROCEDURES.
Figure 109. Progress data
SCANNING MODES AND SETTINGS
115