3DHISTECH PANNORAMIC SCAN RX 1.1 User Manual page 71

PANNORAMIC® SCAN RX 1.1
Preview Toolbar
This section is located at the bottom of the preview image.
•
Save preview
preview camera.
•
Save scanmap
•
Position
Position sample, and then click on the area of interest on the preview image. This will
define the Live image that you can access from the Live view
•
Union – Add the selected areas to the preview. Mark area for scanning based on
the shape selected in the Preview Toolbar. This area will not be scanned.
•
Erase – Delete selected areas from the preview image. Deselection is made based
on the selected shape from the Preview Toolbar. This area will not be scanned.
NOVEMBER 18, 2021
FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC PROCEDURES.
– Click this icon to save the image of the slide recorded with the
– Click this icon to save the currently selected areas to scanmap.
– To position the specimen holder that holds the current slide, click
Figure 45. Not scanned selection
SCANNING MODES AND SETTINGS
.
70