3DHISTECH PANNORAMIC SCAN RX 1.1 User Manual page 121

PANNORAMIC® SCAN RX 1.1
o
Software log
All the circumstances and states of the slide scanning procedure are saved. LogID
is the sequence number of scanning performed on the scanner in use (Profile
Name, Illumination mode, Scan type, Scan Start, Scan Finished, URL, Error).
Filtering for the following parameters is available:
▪
Scanning date
▪
Profile name
▪
Illumination mode
▪
URL
▪
Slide name
▪
Slide index
▪
Rack index
General naming settings
Naming pattern – The set string defines the slide naming pattern (shown by the
example below the text box). Click Reset to set pattern to default. The
abbreviations and their meaning are listed at the bottom of the section under
Usable abbreviations.
NOVEMBER 18, 2021
FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC PROCEDURES.
Figure 111. Scanning log
SETTINGS AND SERVICES
120