3DHISTECH PANNORAMIC SCAN RX 1.1 User Manual page 126

PANNORAMIC® SCAN RX 1.1
In the Message Call section of the window complex messaging functions can be
defined. Here you can setup parameters of the mail server, add or remove users,
and set the message body in the Message subject field by entering a text for
example, to inform recipients on the location of the scanner, or the slide set you
are working with.
Click
mail To field) after you have finished to check their relevancy before applying
them.
First, click SMTP setup to display the E-mail settings window, in which you can
dedicate an e-mail server through which the software sends e-mails to the
selected recipients.
In the E-mail Settings window, the following parameters can be set:
•
Message Type – E-mail
•
Host Address
•
Port
•
E-mail
•
Authentication – User ID and User password are required.
•
Secure Connection (SSL) – If activated, the messages will be sent through secured
connection.
•
If you have properly set messenger settings, click Save.
•
Click Add new user in the Message Call section of the External application call settings
window then enter Display name and Address of the recipient. Select message functions
under the Send Message if: field for the selected recipients (from the drop-down list at
the top of the section).
•
Click Delete user if you want to remove a user from the list after selection.
NOVEMBER 18, 2021
FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC PROCEDURES.
to test settings (by sending an e-mail to the address defined in the E-
Figure 116. Messenger Setup window
SETTINGS AND SERVICES
125