Progress Features - 3DHISTECH Pannoramic 250 FLASH III User Manual

Pannoramic 250 FLASH III 3.0.2 User's Guide

5.5 Progress features

The progress is visible both in Microscope and Planner modes whenever there is a running hardware
operation or scanning procedure. Progress content can be therefore different depending on the type
of the running procedure.
The following information is included in the progress log list during scanning:
Filter
•
Elapsed time
•
Location
•
Slide name
•
Free space
•
FOV number
•
September 16, 2020 – Rev. 1
Figure 86 – Progress information
3DHISTECH Ltd.
5.5 Progress features
115(156)