3DHISTECH PANNORAMIC SCAN RX 1.1 User Manual page 110

PANNORAMIC® SCAN RX 1.1
•
You can also set Scan properties range to a slide with a profile attached. When more
profiles are attached to a slide, always the last scan record will be set with the selected
scan property.
Click '+' to Open ScanContext selector and click Apply to validate the scan properties
settings to all selected slides and related profiles.
NOVEMBER 18, 2021
FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC PROCEDURES.
Figure 101. Scan properties range
Figure 102. ScanContext selector
SCANNING MODES AND SETTINGS
109