PANNORAMIC® SCAN RX 1.1
•
–
Edit
The size of selected area (positive or negative) can be modified at the
borderlines or corners.
•
Crop
– Crop the area of the selected area.
•
Place Circle
the Preview toolbar.
•
Place focus point
coordinates of the manual focus points you add are listed on the Focus settings panel.
Notice:
The maximum number of focus points that you can manually add is 100.
NOVEMBER 18, 2021
FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC PROCEDURES.
Figure 75. Edited negative and positive selection masks
–
You can select the area to be scanned with the different tools on
–
You can add manual focus points on the preview image – the
SCANNING MODES AND SETTINGS
94