3DHISTECH PANNORAMIC SCAN RX 1.1 User Manual page 137

PANNORAMIC® SCAN RX 1.1
Notice:
When having two barcodes on the slide, barcode layout must be consequential.
•
Resize image – Label image is downsized to 1:4 before barcode reading.
•
Apply erode algorithm – The Erode algorithm is run before barcode reading. It is a useful
function for reading 2D barcode types since the algorithm completes the scuffed and
faded areas of the barcode by applying the morphological erode filter to an image. This
filter widens and enhances bright areas of the image.
•
Exclude check digit – Checksum value is ignored when reading Interleaved2of5 and Code39
barcode types.
•
–
Microscope control
o Illumination
▪
Condenser covered
▪
Brightfield illumination
NOVEMBER 18, 2021
FOR RESEARCH USE ONLY. NOT FOR USE IN DIAGNOSTIC PROCEDURES.
Figure 127. Microscope control settings
SETTINGS AND SERVICES
136