Table of Contents
Advertisement
Table 10
Action
Turbo Pump Speed
Foreline Pressure
MSD Fault Status
Ion Source Temp,
Mass Filter Temp,
CI Reagent
MS parameters cannot be set from the LCP while an online OpenLAB CDS session is
NO TE
connected to the MSD.
Table 11
Action
MSD IP via BootP
Gateway IP Address
Subnet Mask
ChemStation IP
GC IP Address
Ping gateway
Ping ChemStation
Ping GC
MS Controller MAC
Table 12
Action
Control firmware
5975/5977 Series MSD Operation Manual
MS Parameters menu (continued)
Description
Displays the turbo pump speed.
Displays the foreline pressure.
Reports a summary fault status code (number) in 'dec' (decimal) and
'hex' (hexadecimal) format covering all possible fault combinations.
o
C
Displays and sets the ion source temperature.
o
C
Displays and sets the mass filter temperature.
Displays CI reagent gas and flow rate (if installed).
Network menu
Description
Displays the IP address for the MSD.
Displays the gateway IP address for the MSD.
Displays the subnet mask for the MSD.
Displays the IP address for the
Displays the IP address for the GC.
Checks communication with the gateway.
Displays the IP address for the
Checks communication with the GC.
Displays the MAC address of the SmartCard in the MSD.
Version menu
Description
Displays the MSD firmware version.
Operating in Electron Ionization (EI) Mode
OpenLAB CDS PC
OpenLAB CDS PC
3
.
.
59
Advertisement
Table of Contents
