Table of Contents
Advertisement
2. Encoder Test – Tests if Encoder
is working.
When you click on Test ON, a number
displays in "Reading:" Rotate Exit
Roller, if number changes, Encoder is
working. Click Next to go to next test.
REMOVE TABS FROM BOTH HEADS FOR REMAINING TESTS.
3. Clutch/Brake Test – Tests function of
Clutch and Brake for both Heads at same
time. Test OFF position has Clutch and
Motor OFF.
Clicking on Test ON causes Clutch and
Motor to turn ON and Brake to go OFF.
You should be able to hear this action.
Use Next key to go to next test.
IMPORTANT
81
TROUBLESHOOTING
Advertisement
Table of Contents
