Table of Contents
Advertisement
PROGRAMMING THE TABBER
7. Next screen tells Tabber how many
Heads will be used for job.
Select Head #2 first so we can turn it
OFF as follows:
8. "Select option to edit" screen
appears. Select None and "Select
Setup Option" screen reappears.
9. "Select Tabber Head # 1 or 2 to
setup" screen reappears. Select
Head #1 this time. This Head will
apply stamps in this case.
WHEN SELECTING HEAD 1, REFER TO SECTION "ADJUSTING TAB
POSITION", STEP 5 TO INSURE TAB SEPARATOR IS SET PROPERLY
10. When you select Head # 1, "Select
option to edit, or" screen appears.
Select Side Tab.
11. From this screen, select # Tabs.
IMPORTANT
56
Advertisement
Table of Contents
