8. On "Select Setup Option" screen
select Automatic.
9. Next screen tells Tabber how many
Heads will be used for job.
Select Head #1 first so that we can
turn it off as follows:
10. "Select option to edit" screen
appears. Select None (No Tab)
and "Select Setup Option"
screen reappears.
11. "Select Tabber Head # 1 or 2 to
set up, or" screen reappears.
Select Head #2. This Head will
apply tabs in this case.
12. When you select Head # 2, "Select
option to edit, or" screen appears.
Select Side Tab.
PROGRAMMING THE TABBER
51