Table of Contents
Advertisement
PROGRAMMING THE TABBER
13. From this screen select # Tabs.
14. In this example, we are going to
apply two tabs to the piece. Select 2.
15. Program will automatically return to
"Select option to edit, or" screen.
Select Product-L.
16. "Enter Product Length and press
SAVE key" screen appears. If you
want to enter length of piece in
inches and tenths, measure it using
scale on Control Panel. Then enter
size using number keys and SAVE
key on Control Panel. As an option,
you may select Automatic and feed
one piece. In this case, Tabber will measure piece and record it in memory.
NOTE: If you choose to enter length manually, you will have to press BACK key to
return to "Select option to edit" screen. If you let Tabber sense piece length, a second
screen appears to tell you to feed a piece. Once that is done, software automatically
returns to "Select option to edit" screen.
52
Advertisement
Table of Contents
