Selecting Side Tab provides following choices:
# Tabs – Select to choose number of tabs to
apply to media with selected Head.
Product-L – Select to set paper length of
media you are using.
Pitch – Select to set tab pitch (distance
from top of one tab/stamp, to top of next
tab/stamp) for tab/stamp stock used on
selected Head.
BACK – Returns to previous screen.
Selecting # Tabs prompts you to select number of tabs/stamps to apply to mail piece with
selected Head.
1 – Selects one tab/stamp
2 – Selects two tabs/stamps
3 – Selects three tabs/stamps
BACK – Returns to previous screen.
Selecting Product-L provides following choices:
BACK – Returns to previous screen.
Automatic – Select to let Tabber
automatically measure and set piece length.
NOTE: Highly recommended that you use
Automatic feature in order to verify proper
media feeding and sensing.
IMPORTANT: Before pressing
Automatic soft key, make sure Feeder is
turned OFF and Tabber's transport power
switch is turned ON.
PROGRAMMING THE TABBER
43