DOK-SUPPL*-VDP*08.3***-PR02-EN-P
Rexroth IndraControl VDP 08.3/40.3 Operator Terminal
10
Y-Repeater
10.1
General Information
10.2
Housing Dimensions of the Y-Repeater
This chapter describes the functions and the application of the Y-repeater. Two
operator displays can be connected to one control cabinet PC using a Y-re‐
peater. It cascades up to four operator displays. All operator displays show the
same screen. The operation is only enabled at one operator display at a time.
Use the changeover input for switching to the operation by the other operator
display.
The Y-repeater is provided for rear panel mounting.
Fig.10-1:
Dimensions of the Y-repeater - rear panel
Bosch Rexroth AG
59/81
Y-Repeater