Bosch Rexroth IndraControl VDP 08.3 Manual page 44

42/81 Bosch Rexroth AG
Display and Operating Components
Icon, Display Meaning
LED
LED green Normal mode
With Y-repeater: This is the ac‐
Power
tive VDP
LED off No DC 24 V supply voltage
LED flashes No serial connection to the
green control cabinet PC.
With Y-repeater: This VDP is
not the active VDP
LED yellow Hard disk access
HDD
LED flashes Warning:
yellow identifies errors
LED off Temperature in safe range
Fan in the control cabinet PC
Temp
does not run or runs too slowly
LED flashes
red Temperature > 50 °C
LED red
LED off Normal mode
UPS
LED red The control cabinet PC is cur‐
rently operating in the UPS
mode, i.e. no supply voltage
available!
Fig.6-2: LEDs to display the operation and errors on the front panel
NOTICE
Further information are provided in the respective documentation of the control
cabinet PC.
DOK-SUPPL*-VDP*08.3***-PR02-EN-P
Rexroth IndraControl VDP 08.3/40.3 Operator Terminal
Measure
-
Check supply voltage!
Check cables
-
SMART analysis Exchange hard disk
-
Check the fan in the control
cabinet PC
Reduce surrounding air
temperature!
-
Restore supply voltage, in‐
itiate controlled restart of
the control cabinet PC!
Depending on the used control cabinet PC not
all LEDs are activated. Therefore not all warn‐
ings/messages are displayed.