Important Instructions On Use; Appropriate Use; Introduction; Areas Of Use And Application - Bosch Rexroth IndraControl VDP 08.3 Manual

DOK-SUPPL*-VDP*08.3***-PR02-EN-P
Rexroth IndraControl VDP 08.3/40.3 Operator Terminal
2

Important Instructions on Use

2.1

Appropriate Use

2.1.1

Introduction

2.1.2

Areas of Use and Application

Rexroth products represent state-of-the-art developments and manufacturing.
They are tested prior to delivery to ensure operational safety and reliability.
WARNING
The products are designed for the use in an industrial environment and may
therefore only be used for the intended purpose. If they are not used as inten‐
ded, situations causing personal injury as well as material damage can occur.
Bosch Rexroth disclaims as manufacturer any warranty, liability or
damages occurring due to inappropriate use of the products. Fur‐
thermore, Bosch Rexroth is not paying any compensation. The user
is responsible for any risks resulting from inappropriate use of the
products.
Before using Rexroth products, the following requirements must be met to en‐
sure appropriate use of the products:
● Anyone handling one of the Rexroth products in any way has to read and
understand the respective safety-related guidelines as well as the instruc‐
tions on appropriate use.
● Hardware products have to remain in their original state, i. e. no modifi‐
cation regarding the design is allowed. Software products must not be
decompiled and their source codes must not be modified.
● Damaged or faulty products must not be implemented or put into opera‐
tion.
● It must be ensured that the products are installed as specified in the doc‐
umentation.
The Rexroth VDP 08.3/40.3 displays are passive operating and visualization
terminals forming a PC-based machine operating terminal when used with an
industrial PC.
NOTICE
The VDP 08.3/40.3 displays may exclusively be used with the accessories and
add-on components specified in this documentation. Components not named
expressly mentioned must neither be mounted nor connected. The same ap‐
plies to cables and conduits.
The products may only be operated with the expressly stated configurations
and component combinations as well as with the software and firmware which
is given and specified in the respective functional description.
Typical areas of application of the VDP 08.3/40.3 are:
Bosch Rexroth AG
Important Instructions on Use
Physical injury and material damage might re‐
sult from an inappropriate use of the products!
Danger of destruction of the device if not ex‐
pressly stated accessories, add-on compo‐
nents and other components, cables, conduits,
software and firmware is used.
9/81