24 V Supply Voltage And Digital 24 V Input - Bosch Rexroth IndraControl VDP 08.3 Manual

64/81 Bosch Rexroth AG
Y-Repeater
10.4.5

24 V Supply Voltage and Digital 24 V Input

Cable lengths
Cable lengths between Y-re‐
peater and VDP
Total cable length between
control cabinet PC and VDP
with Y-repeater
Fig.10-8: Cable lengths allowed for VAC01.1S-YD1-NNNN
NOTICE
The total of all cable lengths between the control cabinet PC and the operator
VDP may not exceed 100 m.
If the total of all cable lengths between control cabinet PC and operator display
exceeds 30 m, the data transmission for USB devices connected to the VDP is
limited. See also chapter 7.2.3 "S1 DIP switch".
Fig.10-9: Maximum cable length between operator display and control cabinet PC
Further cable lengths on request.
The power consumption of the Y-repeater is 4 W.
Fig.10-10: Assignment of the digital 24 V input
DOK-SUPPL*-VDP*08.3***-PR02-EN-P
Rexroth IndraControl VDP 08.3/40.3 Operator Terminal
SVGA XGA
800 × 600 pix‐ 1024 × 768 pixels
els
< 80 meters < 70 meters
< 100 meters < 100 meters
Malfunctions if the total of all cable lengths ex‐
ceeds 100 m.
SXGA
1280 × 1024 pix‐
els
< 60 meters
< 100 meters